RESOURCES
Published 2026-11-09 · 3 min read
FLAC vs. WAV vs. MP3: which audio format should you use?
FLAC is lossless and compressed, WAV is uncompressed, MP3 is lossy. File sizes per minute, tags, device support, and what converting can't fix.
The short answer
FLAC and WAV sound identical: both are lossless, so they play back exactly the same audio samples. FLAC compresses those samples without losing any of them, so the file is smaller and carries proper tags and cover art; WAV stores them raw and is what audio editors and a lot of hardware expect. MP3 is lossy: it discards sound that is hard to hear to make the file several times smaller, and what it discards can't be recovered later.
- FLAC: lossless, compressed, well tagged. Best for a music library or archive.
- WAV: lossless, uncompressed, minimal tagging. Best for editing and recording.
- MP3: lossy, small, plays on everything. Best for portable players, cars and sharing.
File sizes per minute
Uncompressed audio size is simple arithmetic: samples per second × bytes per sample × channels. Compressed sizes depend on the music.
- WAV at CD quality (16-bit, 44.1 kHz, stereo): about 10 MB per minute.
- WAV at 24-bit, 96 kHz, stereo: about 35 MB per minute.
- FLAC of CD-quality audio: typically half to two-thirds of the WAV, roughly 5–7 MB per minute. Quiet, sparse recordings compress more; loud, dense mixes less.
- MP3 at 320 kbps: 2.4 MB per minute. At 128 kbps: just under 1 MB per minute.
FLAC vs. WAV
FLAC (Free Lossless Audio Codec) is the better format for storing music. It is smaller, it supports standard tags (artist, album, track number) and embedded artwork, and FLAC files normally carry a checksum of their audio, so corruption can be detected. Its compression level only trades encoding time against size; it never changes the sound.
WAV is better when the next tool expects it: older audio editors, CD-burning software, samplers, broadcast systems and some hardware players. Its metadata support is limited and inconsistently read, and a standard WAV file can't exceed 4 GB.
FLAC vs. MP3
MP3 wins on size and compatibility: every phone, car stereo and old portable player plays it. At high bitrates many listeners can't reliably tell an MP3 from the lossless original in blind tests, though some material and some listeners can.
FLAC wins as a master copy. From a FLAC you can make an MP3, AAC or Opus file at any bitrate later without stacking losses; from an MP3 you can only make a copy of the MP3.
ALAC vs. FLAC
ALAC (Apple Lossless) is Apple's equivalent of FLAC, usually stored in an .m4a file. Both are lossless, so they decode to identical audio; FLAC files are often slightly smaller. The practical difference is software: Apple's Music app and iTunes import ALAC but not FLAC, while much non-Apple software prefers FLAC.
Convyx's M4A output is AAC (lossy), not ALAC. To make Apple Lossless files, use the Music app's Apple Lossless import setting or ffmpeg with -c:a alac.
Converting between them
Converting can move audio into a smaller or more compatible file. It can't add back detail a lossy format has already removed.
- WAV → FLAC: lossless and smaller; the audio is identical.
- FLAC → WAV: lossless but larger. Convyx writes WAV as 16-bit PCM, so a 24-bit FLAC becomes 16-bit — fine for playback, but keep the FLAC if you need the extra bit depth.
- FLAC or WAV → MP3: lossy and much smaller. Convyx uses the LAME encoder at its V2 variable-bitrate setting, which typically averages around 170–210 kbps.
- MP3 → FLAC or WAV: a bigger file with no gain in quality. It only preserves the MP3's sound exactly.
- Embedded cover art isn't carried over by Convyx's audio conversions; add it back with a tag editor if you need it.
What to keep
Keep one lossless copy of anything you care about — FLAC for a library, WAV for a project you're still editing — and make MP3s from it for devices that need them. If all you have is an MP3, keep the MP3: converting it to FLAC or WAV only makes it bigger.